Table of Contents
Advertisement
Panel installation
The fascia of the Arriva 752 is fully assembled and packaged in a separate carton. Always
inspect the glass for any chip or obvious sign of damage before installation. Care is
required when handling the front fascia—no sudden impact or excess force should be
applied.
Glass panels
Always wear gloves and safety
glasses when handling glass.
Installing the front panel
Remove and put aside the two
fascia retaining screws from the
lower fascia mounting brackets
of the heater engine.
Mount the fascia by hooking the
top of the fascia to the body and
rotating the bottom in towards
the engine body.
Using the fascia retaining
screws, secure the fascia to
the heater engine through the
front of the warm air discharge
louvre.
16 | Arriva 752 Installation Guide: 12218-D 04-14
Fascia panel
Fascia retaining
screws and lower mounting brackets
Fascia panel
Top of panel
Fascia retaining
screws
Warm air discharge
louvre
Advertisement
Table of Contents
