Table of Contents
Advertisement
Vertical terminal
Code
= ESROOFCOWL
Roof cowl and connecting pipe
(960 mm installed) for termination of
flue—can be cut to size.
Powder coated (black) galvanised steel
construction.
External wall plate
Flue terminal
22mm
7mm
x6
x2
Mounting/securing screws
Wall terminal kit
Code
= ESWTERM
Used to terminate the flue pipe
(ESPIPE900) in horizontal flue
installations when used in conjunction
with ASPKIT03.
Contains:
•
External wall plate (PVC)
•
End cap (alumnium)
Condensate trap
Code
= ESCONDK
For the small number of vertical
through the wall flue installations,
where the Arriva is installed against a
solid brick wall, or where the direct flue
terminal cannot be used.
Used in conjunction with
ASPDFK, ESBEND, ESPIPE900, and
ESROOFCOWL.
Flue guard
Code
= R1370
Protection against hot flue gases when
the flue terminates low to the ground.
Colour - warm white.
45° flue bends x 2
Code
= ESBEND
Two 45° bends used to facilitate
between horizontal, vertical, and
downwards flueing. Can be used
separately, or together as one 90°
bend.
Two spacers included.
Ø 170 mm
Universal wall plate
Code
= ESPLATE
Used if an extra wall cover plate is
required to tidy any installation work
through the wall, ceiling, or floor.
Arriva 752 Installation Guide: 12218-D 04-14 | 11
Advertisement
Table of Contents
