General Report Format; Hourly Report - Sharp ER-A770 Instruction Manual

General report format

You can program whether or not to skip the following items in the general report.
Procedure

Hourly report

You can program the memory type and the starting time for the hourly report.
Procedure
Program each item as follows:
• DEPARTMENT (Use the selective entry)
SKIP: Skips department data in the general report.
NOT SKIP: Does not skip department data in the general
report.
• TRANSACTION (Use the selective entry)
SKIP: Skips transaction data in the general report.
NOT SKIP: Does not skip transaction data in the general
report.
NOTE
The programming is effective except the tax data/cash-in-drawer
data.
• TAX SALE (Use the selective entry)
SKIP: Skips tax data in the general report.
NOT SKIP: Does not skip tax data in the general report.
• CID (Use the selective entry)
SKIP: Skips cash-in-drawer data in the general report.
NOT SKIP: Does not skip cash-in-drawer data in the general
report.
• DEPT. QUANTITY (Use the selective entry)
SKIP: Skips department quantity in the general report.
NOT SKIP: Does not skip department quantity in the general
report.
• DEPT. %SHARE (Use the selective entry)
SKIP: Skips department %share in the general report.
NOT SKIP: Does not skip department %share in the general
report.
Program each item as follows:
• MEMORY TYPE (Use the selective entry)
15MIN: Selects the 15-minute type.
30MIN: Selects the 30-minute type.
60MIN: Selects the 60-minute type.
• STARTING TIME (Use the numeric entry)
Starting time entry (max. 2 digits: 0 to 23)
189