Replacing The Power Supply - Gateway Tower User Manual

Chapter 13: Upgrading Your Computer
7
Insert the new card into the add-in slot.
You can slightly seesaw the card end-to-end to help insert the card, but
do not bend the card sideways.
8
Push the add-in card retention cover inward, then secure the add-in card
retention cover with the retention thumbscrew.
9
If you disconnected any cables, reconnect the add-in card cables using your
notes from
information.
10
Close the case using the instructions in
11
See the documentation that came with the card for any special software
installation instructions.

Replacing the power supply

To replace a power supply:
1
Identify the computer case style. For more information, see
your computer case style" on page
2
Open the case using the instructions in
258
Step 3. See the add-in card documentation for more
www.gateway.com
"Closing the case" on page
220.
"Opening the case" on page
247.
"Identifying
243.