Selecting A Place To Work; Gathering The Tools You Need - Gateway Tower User Manual

Chapter 13: Upgrading Your Computer
Tips & Tricks

Selecting a place to work

Work on your computer in an area that:
Is clean (avoid dusty areas)
Is a low-static environment (avoid carpeted areas)
Has a stable surface on which to set your computer
Has enough room to place all the computer parts
Is near a grounded outlet so you can test your computer after installation
Is near a telephone (in case you need help from Gateway Technical
Support). The telephone must be directly connected to a telephone jack
and cannot be connected to your computer

Gathering the tools you need

Some tools and supplies that you may need to work on your computer are:
A Phillips screwdriver
A flat-head screwdriver
A notebook to take notes
Small containers to store various types of screws
A grounding wrist strap (available at most electronic stores)
218
When cleaning the case, do not use abrasive or solvent
cleaners because they can damage the finish. Use soap
and water or a dilution of water and isopropyl alcohol. For
more information, see "Cleaning your computer" on
page 202.
www.gateway.com