Table of Contents
Advertisement
Chapter 7: Upgrading Your Computer
Tips & Tricks
Selecting a place to work
Work on your computer in an area that:
■
Is clean (avoid dusty areas)
■
Is a low-static environment (avoid carpeted areas)
■
Has a stable surface on which to set your computer
■
Has enough room to place all the computer parts
■
Is near a grounded outlet so you can test your computer after installation
■
Is near a telephone (in case you need help from Gateway Technical
Support). The telephone must be directly connected to a telephone jack
and cannot be connected to your computer
Gathering the tools you need
Some tools and supplies that you may need to work on your computer are:
■
A Phillips screwdriver
■
A flat-head screwdriver
■
A notebook to take notes
■
Small containers to store various types of screws
■
A grounding wrist strap (available at most electronic stores)
98
When cleaning the case, do not use abrasive or solvent
cleaners because they can damage the finish. Use soap
and water or a dilution of water and isopropyl alcohol. For
more information, see
"Cleaning your computer" on
page
74.
www.gateway.com
Advertisement
Table of Contents
Troubleshooting
