Factory Menu - Black Box CRCW-12 User Manual

The table that follows shows the factory default parameters.
Parameter
Temperature Setpoint
CW Valve Cut-in
CW Valve Cut-out
Humidity Setpoint
Humidity Cut-in
Humidity Cut-out
Dehumidify Cut-in
Dehumidify Cut-out
The second Service>Save Cfg menu screen allows you to set new passwords for entering the Control and Service menus.

4.5.5.11 Factory Menu

The Factory Menu loop may be accessed from the Service>Factory screen. You must enter the factory-level password to gain
access to the loop. Contact Black Box Tech Support for the password and for guidance when adjustments must be made at this
level.
Table 4-10. Factory default setpoints.
Default Value
72° F
74° F
72.3° F
45% RH
40% RH
43% RH
50% RH
47% RH
Figure 4-69. Set Passwords screen.
Figure 4-70. Factory Menu screen.
724-746-5500 | blackbox.com
Chapter 4: E2 Controller
Page 79