Table of Contents
Advertisement
Chapter 4: E2 Controller
4.2 Navigating Controller Display Screens
4.2.1 Menu Selection
The E2 Series controller provides five user-selectable menus needed to view operating data and enter setpoints for the system (see
Figure 4-6). These menus may be accessed from a scrolling Main Menu screen by pressing the Program
key. You are then
allowed to scroll between adjacent menu selections within the Main Menu by using the up
and down
arrow keys. When
the desired menu is centered in the screen with bold capital letters and an arrow symbol is pointing towards the Enter
key,
you may press the Enter
key to access that menu loop. The user can access the menu loop screens located within the
designated menu selection using the up
and down
arrow keys. Access to some menus may be protected by a built-in
security protocol and may require the use of a password to gain access.
4.2.2 Menus
From the Main screen, you may press the Program (Prg) key to select from among the five menus shown in Figure 4-6.
Figure 4-6. Menu selections.
724-746-5500 | blackbox.com
Page 38
Advertisement
Table of Contents
Troubleshooting
