Chapter 4: E2 Controller
4.5.3.2 Non-Critical Alarms
A non-critical alarm will activate the alarm screen that it is associated with. These alarms are programmed to activate the
"Summary Fault" alarm and close the "Summary Fault" relay contacts without stopping unit operation.
Some examples of the factory-programmed, non-critical alarms are:
• High Temperature
• Low Temperature
• High Humidity
• Low Humidity
• CW Flow Failure
Page 56
• Moisture Detection
• Change Filter
• Sensor Failure
• Communication Failure
724-746-5500 | blackbox.com