Setpoint Adjustment - Black Box CRCW-12 User Manual

4.3.1 Setpoint Adjustment

1. From the Main screen, access the Main Menu screen by pressing the program
2. Scroll through the Main Menu selections with the Up
Enter key when "CONTROL" appears in bold letters in the center of the screen. A password entry screen will be displayed.
3. To access the Control menu, press the Enter
Change the "0" to "1" (or to the current Control menu password if it was changed in the Service menu) with the Up
key and then press the Enter
4. From the Control menu, select Setpoints by scrolling through the menu selections with the Up
pressing the Enter key when "SET" appears in bold capital letters in the center of the screen.
5. After entering the Setpoints screens, select the Temperature setpoint screen by scrolling the menu selections with the Up
and Down arrow keys until the word "Temperature" appears in the field at the top of the screen.
Pressing the Enter key places the flashing cursor in the setpoint value field. Increase or decrease the Temperature Setpoint with
the Up and Down arrow keys until the desired temperature value is shown.
Press the Enter key again to accept the setpoint (this removes the cursor from the field).
6. From the Temperature setpoint screen, select the Humidity Setpoint screen by scrolling with the Up
When the word "Humidity" appears in the field at the top of the screen, press the Enter
setpoint value field.
and Down
key twice to insert a flashing cursor in the "Enter Password" field.
Figure 4-14. Flashing cursor.
key to accept the password. Press the Enter
Figure 4-15. Set screen.
Figure 4-16. Temperature screen.
724-746-5500 | blackbox.com
Chapter 4: E2 Controller
key.
arrow keys and select the Control menu by pressing the
Flashing
cursor
key again to access the Control menu screens.
key to move the cursor into the
arrow
and Down arrow keys and
or Down arrow key.
Page 43