TDK veloCD ReWRITER Installation And User Manual page 30

Internal atapi-ide cd rewriter drive
Table of Contents

Advertisement

SYMPTOMS
Writing error occurs.
Buffer underrun.
Does not record at max speed.
(continued)
Cannot add information to CD-R
or CD-RW disc.
Cannot write at max speed.
Cannot write onto CD-RW speeds
greater than 4x.
26
veloCD ReWRITER : User's Manual
CAUSES
7.Defective CD-R or CD-RW media.
CD-R or CD-RW media may be
dirty , scratched, or damaged.
8. Buffer underrun option is not
enabled in your software.
1.The CD-R or CD-RW disc was
originally written using other
software. If the software is
different, incompatibility errors
may occur .
2.Not enough disc capacity.
Capacity of a standard 74-min.
CD is limited to 650 MB.
Capacity of an 80-min. CD
is limited to 700 MB.
3.The disc is written on with a
CD-R or CD-RW drive from
another vendor .
1.Using poor quality media.
2.Buffer underrun occurring.
3.Using CD-RW media. This drive
does not support max speed with
CD-RW media.
4.Defective CD-R media.
5.Using authoring software
other than that bundled with
the veloCD.
6.CD-ROM drive used cannot read
data fast enough to record at
max speed.
1. Not using high-speed
CD-RW media.
SOLUTIONS
7.ReWrite using another CD-R or
CD-RW disc.
8. Ensure that the buffer underrun
option is enabled in the recording
menu before you write to your media.
1.Always use the same authoring
software to add content to a disc.
2.Use different CD-R or CD-RW
media if the capacity is insufficient.
3.Use a different CD-R or
CD-RW disc. T ry to use same drive
to add more data to CD-R or
CD-RW disc.
1.Use the CD-R/RW media
recommended by TDK. Supported
media lists can be found in
the Appendix.
2.Reduce the load on CPU resources.
Some ways to do this are:
Log off from the network.
Don't use the mouse.
Disable the screen saver or
power save mode.
Quit all other applications except
the authoring software.
3.Use CD-R media.
4.CD-R media may be dirty ,
scratched, or damaged. Rewrite
using another CD-R disc.
5. T o use other types of authoring
software, contact the supplier and
ensure the software support the
veloCD CD-RW drive.
6.Record to hard drive first, then
to veloCD.
1. The veloCD drive only supports
high-speed CD-RW media when
writing at speeds greater than 4x.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the veloCD ReWRITER and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Products for TDK veloCD ReWRITER

This manual is also suitable for:

Velocd

Table of Contents