Child Lock; Residual Heat Indicators - Belling PBi60 AU Users Manual & Installation Handbook

L
USING THE INDUCTION HOB
. .

Child Lock

This feature is to help prevent accidental switching on of the hob, especially by
young children.
To Activate:
1) Select the On/Off Key.
2) Simultaneously touch the RHF cook zone and the Power Boost keys, the hob
should beep.
3) Remove fingers and touch the RHF cook zone again. (L should appear in all the
cook zone displays).
4) Switch off the hob.
When you now switch on the hob "L" will appear in all the cook zone displays. The
child lock feature will be permanently activated, to de-activate follow the procedure
below.
To operate the hob with Child Lock Activated:
1) Select the On/Off Key. (L will be displayed on all Cook Zones).
2) Simultaneously touch the RHF cook zone and the power boost button, (L will dis-
appear from all cook zones).
3) The hob can now be used normally.
To de-activate the child lock:
1) Select the On/Off Key. (L will be displayed on all Cook Zones).
2) Simultaneously touch the RHF cook zone and the Power Boost keys, the hob
should beep.
3) Remove fingers and touch the Power boost key again. (The hob should switch
off).
4) When you now switch on the hob "0." will be displayed in all cook zone displays,
the hob can now be used normally.

Residual Heat indicators

If when the cook zone is switched off the glass surface is above 60C, H will be dis-
played in the cook zone display until the glass surface drops below approx 55C.
This feature not only warns you against hot surfaces but also indicates that there is
residual heat which can be used as temporary warm zone.
Note
The cook zone itself does not heat up, but the ceramic glass does get hot because of
the hot pan conducting heat back onto the hob glass.
19
.
.