Belling PBi60 AU Users Manual & Installation Handbook page 21

Griddle Zone with Bridge
Function
Flexibility is what counts.
The LH zones can be used as two sep-
arate round cooking zones which can
be controlled individually or they can
be bridged to provide a large oval
zone that can be controlled via one
setting. Large pans and griddle plates
can be placed across the two zones.
To Operate:
1)Simultaneously select the LHF & LHR
cook zones (n will appear in the LHR
cook zone display).
2)The power setting is controlled via
LHF cook zone (0-9).
3)To cancel the bridge function, simul-
taneously select the LHF & LHR cook
zones (n will disappear from the LHR
cook zone display). The LHF & LHR
zones can now be operated independ-
ently.
Keep Warm
The Keep Warm setting is found
between power setting 0 and 1 indi-
cated by the symbol
USING THE INDUCTION HOB
Pan detection
When a zone has been activated but
no pan has been placed on the cook
zone, this means the hob only uses
power when a suitable pan is placed
on the zone, this reduces the energy
used during the cooking process, i.e.
when you take your pan off the zone
the hob automatically reduces the
power, and only switches back on
when you replace the pan.
Note If the
appear when a pan is placed on the
zone it indicates that the pan is not
suitable for induction cooking.
Get a magnet & check the pans.
Pan Sizes
Cook Zone
17
.
.
symbol does not dis-
Smallest recommend-
ed pan diameter
LHF
LHR
RHF
RHR
145 mm
145 mm
120 mm
180 mm