Electronic Clock - DeLonghi DTC 90 DF User Operating Instructions Manual

3
3
Electronic clock/end cooking timer
The electronic programmer is a device with the following functions:
– 24 hours clock with illuminated display
– Timing of oven cooking with automatic switch-off (max. 99 minutes).

ELECTRONIC CLOCK

Upon immediate connection of the oven or after a mains failure, three zeros will flash
on the programmer panel.
To set the clock it is necessary to push the
or button until you have set the correct time.
The clock will show zero after a mains failure.
Attention: When the programmer display shows three flashing zeros the oven cannot
be switched on.
The oven can be switched on when the symbol
SETTING THE FREQUENCY OF THE ALARM SOUND
The selection from 3 possibilities of sound can be made by pressing the
8
(main left oven only)
A
U
T
O
Fig. 3.1
button and then, within 7 seconds, the
is shown in the display.
button.