Eaton PV240 User Manual page 39

K. Utility Configuration DIP Switch
It is a utility configuration dip switch that is embedded within DC/AC wiring
box. This dip switch allows the user to do different configurations of the
PV Inverter in order to let it connect to the different public grid systems
using the same inverter. The dip switch is located at the right-bottom side
of wiring box, which just under RS485 interface card and nearby the
RS232 interface port as below shown in figure 6.2.15:
Figure 6.2.15: Utility Configuration DIP Switch
Eaton Corporation Page 39 Ver 1.1