Eaton PV240 User Manual page 20

CAUTION
Do not to install PV Inverter horizontally and tilt-forward direction
as illustrated above. The PV Inverter is designed only for the
vertical installation position. Do not place any obstacles on the
top of PV Inverter.
Moreover, PV Inverter may make noise during operation. As a
consideration, install the PV Inverter away from living or
working areas where noise could be a concern.
E) Fix the bracket by using outer mounting holes
i) A rectangular-shaped mounting bracket that shipped with the Eaton
grid-tied PV Inverter is able to be used with all types of walls such as
stone wall, brick wall or wooden wall, but it is more important to
ensure the wall that is selected will be able handle with the weight of
PV Inverter, specifically the installations that are wooden walls.
Figure 5.4.3 described the required dimension of drilling locations:
Figure 5.4.4: Dimension of Drilling Point for the Wall
Eaton Corporation Page 20 Ver 1.1