Eaton PV240 User Manual page 22

WARNING
It is important to ensure the drilling locations are not located on
any electrical wiring within the wall.
F. Mount the PV Inverter into the mounting bracket as illustrated below.
i) Hook up the PV Inverter by aligning the opening of rear-side
enclosure and place the PV Inverter into each targeted wedge
points of the mounting bracket as illustrated below:
Figure 5.4.7: Install PV Inverter into mounting bracket
IMPORTANT
Check the mounting bracket again before the PV Inverter is hung
on the bracket. It is recommended to have least 2 service
personnel for this procedure due to the weight of unit.
Eaton Corporation Page 22 Ver 1.1