Check For Latest Patches And Firmware - Sun Oracle SPARC T4-1 Getting Started Manual

Hide thumbs Also See for SPARC T4-1:

Installation manual (74 pages)

Table of Contents

7. At the terminal device, log in to the SP as root with a password of changeme.

SUNSP00144FAC732F login: root

Password: changeme

. . .

After a brief delay, the Oracle Integrated Lights Out Manager (Oracle ILOM) prompt (->) is displayed. For

optimal security, change the root password. Refer to the Oracle ILOM documentation for more information

about administration tasks such as changing passwords, adding accounts, and setting account privileges.

Note –

By default, the SP is configured to use DHCP to obtain an IP address. If, instead, you plan to assign a

static IP address to the SP, refer to the installation guide for instructions.

8. Power on the server and redirect the host output to display on the serial terminal device.

-> start /SYS

Are you sure you want to start /SYS (y/n)? y

-> start /HOST/console

Are you sure you want to start /HOST/CONSOLE (y/n)? y

Serial console started.

. . .

The server initialization takes approximately 20 minutes to complete.

9. When prompted, follow the onscreen instructions and type the configuration information for your system.

If you are not sure how to respond, accept the default and make changes later when the Oracle Solaris OS is

running.

After you confirm the configuration information, the server reboots and displays the Oracle Solaris login

prompt.

10. Log in to the server.

Use the following commands to display information about the system:

showrev – Displays the host name and system architecture information. Use the -a option to display the

■

patches that are installed.

psrinfo – Displays information about the number and status of the processors and cores in the host.

■

Refer to the Oracle Solaris OS man pages and documentation for more details about these commands.