Check For The Latest Os, Patches, And Firmware - Sun Oracle Netra SPARC T3-1B Getting Started Manual

1. Power on the server module host.
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS . . .
The server module initializes.
2. Switch communication to the server module host.
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
The server module might take several minutes to complete POST. If a boot device installed with the Oracle
Solaris OS is accessible locally, the server module boots. Otherwise, the system uses the boot net command
to seek a boot device on the network.
You are now connected to the server module host.
The server module hardware installation is complete and the server module is ready to be configured to suit
your needs. For details on the Oracle Solaris OS configuration process, see the Netra SPARC T3-1B Server
Module Installation Guide and the installation guides for your version of Oracle Solaris OS.

▼ Check for the Latest OS, Patches, and Firmware

Later versions of OS, patches, and firmware might be available for your server module. Some features can
only be enabled when certain patches or firmware are installed. Install the latest available versions for the
best performance, security, and stability.
1. Review the SPARC T3-1B Server Module Product Notes at:
http://www.oracle.com/pls/topic/lookup?ctx=E21652-01&id=homepage
This document describes important product dependencies and late-breaking information.
2. Access the latest OS, patches, and firmware information from the system administration portal:
http://www.oracle.com/technetwork/systems/software-stacks/stacks/index.html
Under the Netra Carrier-Grade Systems heading, select the Netra SPARC T3-1B Server Module link.
To stop, type #.
5