Telephone Line Tones - Programming Mode - 2N SmartGate User Manual

Dialing end signaling
Only

Dialing reception has been terminated. Connection is being established.

PIN tone

Enter the PIN code.

This tone is transmitted upon power up if the PIN has to be entered manually.

PUK tone

Enter the PUK code.

This tone is transmitted upon repeated wrong PIN entering attempts. SIM card

is blocked.
Telephone Line Tones – Programming Mode
Tones confirming/refusing the values entered are transmitted during telephone line
based programming. Each tone has a different melody.
Confirmation

Confirms that the service password or parameter number entered is correct

and has been accepted.
Refusal

Incorrect parameter number;

Incorrect parameter value

Transmitted when a parameter is cancelled with a

Saving

Parameter value entered is correct and has been saved

Description
.
2.1
16