Page 1
® StarGate How to redesign PRI gateway to PRI/VoIP gateway Quick guide www.2n.cz Version 1.00...
Page 2
Quick guide 2N StarGate 1.1. What you need to start • CPU with bios 2.52 • New thin VoIP card • PRI card • Special firmware 1.2. Redesign • Remove all cards from gateway • Between 3rd and 4th position (counting from right) is red and five black jumpers.
Page 3
Quick guide 2N StarGate 1.3. Finishing of configuration • Upload firmware for VoIP card. If you are not able to do that check it MAC address is set for VoIP interface by at command ati4 SNumber: M112-0812345678 MacAddr: 00-50-B2-81-AB-4A DspAddr: 00-50-F2-25-AC-8A...
Need help?
Do you have a question about the StarGate and is the answer not in the manual?
Questions and answers