Power-On Microprocessor Reset Procedure - Yaesu FT-817ND Operating Manual

P -
OWER ON
Some or all transceiver settings can be reset to their factory-default states using one of the
following power-on routines:
 + POWER on: Reset all memories and following menu setting to factory-default.
Menu #06 (AM STEP AM STEP), 23 (DCS CODE
AM STEP AM STEP AM STEP
47 (SSB STEP SSB STEP), and 48 (TONE FREQ
SSB STEP SSB STEP
SSB STEP
 + POWER on: Reset all menu setting (except following menu) to factory-default.
Menu #06 (AM STEP AM STEP), 23 (DCS CODE
AM STEP AM STEP
AM STEP
47 (SSB STEP SSB STEP), and 48 (TONE FREQ
SSB STEP SSB STEP
SSB STEP
 + POWER on: CPU master reset for all memories and menu setting.
76
M
ICROPROCESSOR
DCS CODE), 30 (FM STEP
DCS CODE DCS CODE DCS CODE
TONE FREQ TONE FREQ
TONE FREQ TONE FREQ).
DCS CODE), 30 (FM STEP
DCS CODE DCS CODE
DCS CODE
TONE FREQ TONE FREQ). TONE FREQ
TONE FREQ
R P
ESET
FM STEP), 35 (MEM TAG MEM TAG), 42 (RPT SHIFT
FM STEP FM STEP FM STEP MEM TAG MEM TAG MEM TAG
FM STEP), 35 (MEM TAG MEM TAG), 42 (RPT SHIFT
FM STEP FM STEP MEM TAG MEM TAG
FM STEP MEM TAG
FT-817
ND
ROCEDURE
RPT SHIFT RPT SHIFT RPT SHIFT), RPT SHIFT
RPT SHIFT RPT SHIFT
RPT SHIFT RPT SHIFT),
Operating Manual