Operation On 5 Mhz Band; (U.s. Version Only) - Yaesu FT-817ND Operating Manual

O
PERATION
O
PERATION ON
The FT-817 includes the capability for transmission and reception on the five spot frequen-
ND
cies assigned to the Amateur Service in the United States. To operate on the 5 MHz band:
1. Press the
"Memory" mode (a memory channel number
"M- nnn " will appear on the display in the
nnn nnn
M- M- M- nnn nnn
M-
space previously occupied by "VFOa
"VFOb
VFOb VFOb VFOb").
VFOb
2. Rotate the
channel ("M-601 M-601" through "M-605
M-601 M-601
M-601
permitted frequencies in the 5 MHz band.
If you have partitioned your memory channels into Memory
Groups via Menu #34, the memory channel numbers for 60-
meter operation will be displayed as "l - l - l - l - l - 001
page 46 for details regarding Memory Group operation, and
page 65 for details regarding Menu #34.
3. Pressing the
switches the operating mode between SSB and CW.
4. To exit from 60-meter operatin and return to the VFO mode,
just press the
replaced by "VFOa VFOa" or "VFOb
VFOa VFOa
VFOa
The frequencies and operating mode for 5 MHz band op-
eration are both fixed, and may not be changed.
1. Press the
2. Rotate the
at the factory, with the permitted frequencies in the 5 MHz band.
3. Press the
4. When the "transmit" command is received from the TNC, the FT-817
mitter will be engaged. The microphone input is disabled automatically when
transmitting the PSK signal.
Likewise, the TNC "receive" command will cause the radio to revert to the re-
ceive mode.
You can adjust DATA input level using Menu #25 [DIG MIC].
During PSK operation via the rear panel DATA jack, the front panel MIC
jack is cut off, so you won't have a "live microphone" problem during data opera-
tion.
Set the PSK sub carrier frequency of the TNC to 1.5 kHz.
22
5 MH
Z
key once to enter the
VFOa" or
VFOa VFOa
VFOa
knob to select the desired
M-605"), at the factory, with the
M-605 M-605
M-605
or
key (the memory channel number will be
VFOb VFOb
VFOb"). VFOb
PSK Operation on 5 MHz Band
key once, if necessary, to enter the "Memory" mode.
knob to select the desired channel ("M-601
or
( U.S. V
B
AND
E
CLAR
SEL
001" ~ "l - l - l - l - l - 005 005." See
001 001 005 005
001 005
key momentarily,
M-601" through "M-605
M-601 M-601
M-601
key to select the SSB mode.
FT-817
O
ERSION NLY
V/M
F
V
[ Memory Group "OFF" ]
[ Memory Group "ON" ]
CH No. F
REQUENCY
M - M - 601 601
M - M - M - 601 601 601
5.3320 MHz
M - M - M - M - 602 M - 602 602 602 602
5.3480 MHz
M - M - 603 603
M - M - M - 603 603 603
5.3585 MHz
M - M - M - M - M - 604 604 604 604 604
5.3730 MHz
M - M - M - 605 M - M - 605 605 605 605
5.4050 MHz
M-605 M-605"), M-605
M-605
trans-
ND
Operating Manual
ND
)
M
LOCK
PWR
SQL/RF