Labeling Memories - Yaesu FT-817ND Operating Manual

You may wish to append an alpha-numeric "Tag" (label) to a memory or memories, to aid in
recollection of the channel's intended use (such as a club name, etc.). This is easily accom-
plished using the Menu mode.
1. Recall the memory channel onto which you wish to appended a label.
2. Press and hold in the
3. Rotate the
4. Press the
5. Rotate the
you with to store, then rotate the
6. Again rotate the
knob clockwise to move to the next character's slot.
7. Repeat step 6 as many times as necessary to complete the name tag for the memory, then
press and hold in the
entry and exit to normal operation.
During Memory operation, press the
tate the knob, as needed, until Operating Function Row 2
[ MW TAG ] appears on the display. Press the
MW MW MW, MC MW MC, TAG MC MC MC TAG TAG TAG
momentarily to activate the alpha-numeric Tag. Repeatedly press-
ing this key will toggle operation between "Frequency" display
and "Tag" display.
You can recall Menu #35 (MEM TAG
ing and holding in the
FT-817 Operating Manual
ND
L
ABELING
key for one second to enter the Menu mode.
knob to recall Menu #35 (MEM TAG
knob to enable the programming of the label.
knob to select the first character (number, letter, or symbol) in the name
knob to select the next number, letter, or symbol, then rotate the
key for one second to save the A/N (Alpha-Numeric) name
MEM TAG MEM TAG MEM TAG) instantly by press- MEM TAG
( TAG TAG ) key for one second.
TAG TAG
TAG
M
EMORY
M
EMORIES
MEM TAG MEM TAG
MEM TAG). MEM TAG
knob clockwise to move to the next character.
key momentarily, then ro-
( TAG TAG ) key
TAG TAG TAG
O
PERATION
[ "Frequency" Display ]
[ "Tag" Display ]
49