Configuring A Two-Post Center-Mount - Dell Networking S6000 Installation Manual

Configuring a Two-Post Center-Mount

Step Task
Slide the plunger bracket rearward until it clicks into place and secure the bracket to the front post flange with two
1
user-supplied screws. Refer to
Figure 4-3. Two-Post Center-Mount Configuration
Slide the back bracket towards the post and secure it to the post flange with two user-supplied screws. Refer to
2
Figure 4-3, item 2.
Repeat this procedure for the second rail.
3
Figure 4-3, item 1.
Install the S6000 | 25