Basic Installation Requirements - Dell Networking S6000 Installation Manual

Fully featured switch/router one rack unit (ru) system
Hide thumbs Also See for Networking S6000:
Table of Contents

Advertisement

Table 2-2. 40G QSFP+/ 4x10G SFP+ Ethernet Port LEDs
Feature
Link/Activity LED
Table 2-3. Management Ethernet Port LEDs
Feature
Link LED
Activity LED

Basic Installation Requirements

Detailed installation instructions for the S6000 are provided in
and
Chapter 4, Install the
installation of the S6000:
• S6000 chassis
• If you ordered AC units, cables to connect the AC power source to each of the chassis' AC power
supplies (country/regional configured)
• If you ordered DC units, cables to connect the DC power source to each of the chassis' DC power
supplies
• Mounting brackets for rack installation (included)
• Screws for rack installation and #1 and #2 Phillips screwdrivers (not included)
• Ground cable (not included)
• Ground cable screws (included)
• Copper/fiber cables
Optional components for installation:
• Additional power supply units
• Additional fan modules
• Additional mounting brackets (if installing in a 4-post rack or cabinet)
14
|
The S6000 System
Detailed Description
• Off — No Link.
• Blinking green — Transmit/Receive is active.
• Solid green — Link up at 40Gbps/10Gbps speed.
Detailed Description
• Off — No Link.
• Solid green —
Link on 10/100M/1G speed.
• Off — No Link.
• Blinking green — Transmit/Receive is active.
S6000. However, here is an initial list of components required for a successful
Chapter 3, Site Location and Preparation

Advertisement

Table of Contents
loading

Table of Contents