Two-Post Center-Mount Installation - Dell S4100-ON Series Setup Manual

Figure 4. Two-post flush-mount installation
2 Attach one rail to the front post flange with two user-supplied screws, item 2.
3 Slide the plunger bracket forward against the vertical post and secure the plunger bracket to the post flange with two user-supplied
screws, see item 3.
4 Repeat this procedure for the second rail.

Two-post center-mount installation

NOTE: For more installation instructions, see the installation labels attached to the rail assembly.
1 Slide the plunger bracket rearward until it clicks into place and secure the bracket to the front post flange with two user-supplied
screws, item 1.
S4100–ON Series installation 13