Accessing The Usb-B Console Port - Dell Networking S6000 Installation Manual

Step Task (continued)
Keep the default terminal settings on the S6000 console as follows:
3
• 9600 baud rate
• No parity
• 8 data bits
• 1 stop bit
• No flow control

Accessing the USB-B Console Port

The terminal settings are the same for the USB-B port and the console port:
• 9600 baud rate
• No parity
• 8 data bits
• 1 stop bit
• No flow control
When you connect the USB-B port, it becomes the primary connection and, when the system is
connected, it sends all messages to the USB-B port.
Figure 7-2. USB-B Console Port Connector
1 - USB-B port
2 - USB-A port
40 | Management Ports