Physical Dimensions; Chassis Ports; Determine System Status; Led Displays - Dell Networking S6000 Installation Manual

Fully featured switch/router one rack unit (ru) system

Hide thumbs Also See for Networking S6000:

Table of Contents

• Temperature monitoring

• Software-readable thermal monitor

• Real time clock (RTC) support

• Hot-plugging redundant power supply

• Current monitoring for power management

• Removable fan that you can manage

• Standard 1U chassis high

Physical Dimensions

The S6000 has the following physical dimensions:

• 434 x 460 x 43.5 mm (W x D x H)

• 17.09 x 18.11 x 1.71 inches (W x D x H)

The following is a list of the standard ports located on each S6000 chassis:

• Serial RS-232 port (RJ-45 type)

• Out of band (OOB) Ethernet management port (RJ-45 type)

• Thirty-two 40Gbps QSFP+ ports

• One universal serial bus port (USB Type-A)

You can view S6000 status information in several ways, including LEDs and boot menu options. Also,

you can view status information through the CLI show commands and with simple network management

protocol (SNMP) traps. For more information about these options, refer to the FTOS Command Line

Reference Guide for the S6000 System and the FTOS Configuration Guide for the S6000 System.

As shown in

Figure

2-3, the S6000 includes LED displays on both the I/O and PSU side of the chassis.

Table 2-1

through

Table 2-3

and fan status.

list the LED definitions for the S6000 system. This includes the system, PSU,

The S6000 System

Table of Contents