Two-Post Center-Mount Installation - Dell S4248FB-ON Installation Manual

Figure 11. Two-post center-mount threaded round-hole installation
2 Slide the back bracket towards the post. Secure it with two user-supplied screws, see item 2.
3 Slide the front bracket forward against the front of the vertical post and secure it to the post flange with two user-supplied screws,
see item 3.
4 Repeat this procedure for the second rail.

Two-post center-mount installation

CAUTION: Your switch is not NEBS Earthquake Z4-compliant if you this installation method.
NOTE: For more installation instructions, see the installation labels attached to the rail assembly.
1 Slide the bracket rearward until it clicks into place and secure the rail bracket to the front of the post flange with two user-supplied
screws, item 1.
S4200-ON Series installation 23