Tape Operations; Listening To A Tape - JVC KW-XC838 Instruction Manual

TAPE OPERATIONS

Listening to a tape

You can play back type 1 (normal) tapes.
1
Insert a cassette into the cassette
compartment.
The unit turns on and tape play starts
automatically.
When one side of the tape reaches its end
during play, the other side of the tape
automatically starts playing. (Auto Reverse)
Tape indicator flashes.
Note on One-Touch Operation:
When a cassette is already in the cassette
compartment, pressing TAPE/AUX turns on the
unit and starts tape play automatically.
2
Turn on or off the Dolby B NR* as
needed.
1 Press MODE repeatedly until
22
"DOLBY B" appears.
DOLBY B
B.SKIP
REPEAT
Canceled
2 Press SEL.
Each time you press the
button, the Dolby B NR turns
on ("DOLBY ON") and off
("DOLBY OFF").
This indicator lights up when the Dolby B
NR is turned on.
3
Select the tape direction.
Each time you press the
button, the tape direction
changes alternately.
* Manufactured under license from Dolby
Laboratories.
"Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.