Tape Operations; Listening To A Cassette - JVC KS-FX43R Instructions Manual

TAPE OPERATIONS

Listening to a cassette

You can play back type I (normal) tapes.
1
Turn on the power.
Note on One-Touch Operation:
If a cassette is already in the cassette
compartment, tape play starts automatically.
However, it is not recommended to leave the
cassette in the compartment when turning off the
power or ignition key. It may damage the tape
head and the cassette.
2
Insert a cassette into the cassette
compartment.
3
Select the tape direction.
18
When one side of the tape
reaches its end during play,
the other side of the tape
automatically starts playing
(Auto Reverse).
Press both buttons at the
same time.
Each time you press both
buttons, the tape direction
changes alternately—
forward ( ) and
reverse ( ).
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette ejects from the
cassette compartment. The source changes to
the previously selected one.
• You cannot change the source if the cassette is
still in the cassette compartment.
To change the source, you must eject the
cassette first.
• You can also eject the cassette by pressing 0
while the unit is turned off.
To fast-wind a tape
Press in ¡ or 1.
The tape will be wound in the direction of the
arrows (¡ or 1).
To restart playback, lightly press the other
button which is not pressed in (1 or ¡).
Tape direction