Changing General Settings (Psm) - JVC KW-XC838 Instruction Manual

5
Adjust the minute.
6
Finish the setting.
To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for 5
seconds, then the power turns off.
30

Changing general settings (PSM)

You can change the settings for this unit by using
the PSM (Preferred Setting Mode) control.
Basic Procedure
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See page 31.)
2
Select a PSM item you want to
adjust. (See page 31.)
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Finish the setting.