Cd Changer Operations; Playing Cds - JVC KW-XC838 Instruction Manual

We recommended that you use one of the CH-X
series with your unit (except for JVC MP3
compatible CD changer.)
If you have another CD automatic changer,
consult your JVC car audio dealer for
connections.
• For Example, if your CD automatic changer is one
of the KD-MK series, you need a cord (KS-U15K)
for connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with
your CD changer.
• If no discs are in the magazine of the CD
changer or the discs are inserted upside
down, "NO DISC" will appear on the display. If
this happens, remove the magazine and set
the discs correctly.
• If "RESET 1 – RESET 8" appears on the
display, something is wrong with the
connection between this unit and the CD
changer. If this happens, check the
connection, connect the connecting cord(s)
firmly if necessary, then press the reset button
of the CD changer.

Playing CDs

Select the CD automatic changer (CD-CH).
Playback starts from the first
track of the first disc.
All tracks of all discs are played
back.
Track number

CD CHANGER OPERATIONS

Elapsed playing time
Note on One-Touch Operation:
When you press CD/CH, the power automatically
comes on. You do not have to press
on the power.
Note:
If you play a CD with assigned name (see page 33),
the assigned name appears on the display, followed by
the track number and elapsed playing time.
To change the display information
While playing back a CD, you can
change the information shown on
the display.
Each time you press DISP
(display), the display changes to
show the following:
Current track no.
and Elapsed playing time
Assigned name*
* If no name is assigned, "NO NAME" will appear.
/ to turn
ATT
Disc no. and
Current track no.
35