Table of Contents
Advertisement
TAPE OPERATIONS
Listening to a cassette
You can playback type I (normal) tapes.
1
Turn on the power.
Note on One-Touch Operation:
If a cassette is already in the cassette compartment, tape
play starts automatically. However, it is not recommended
to leave the cassette in the compartment when turning
off the power or ignition key. It may damage the tape
head and the cassette.
2
Insert a cassette into the cassette
compartment.
3
Select the tape direction.
Press the both buttons at the same time.
Each time you press the button, the tape
direction changes alternatively – forward
(
) and reverse (
8
S.BASS
SEL
DISP
8
9
7
When one side of the tape
reaches its end during play,
the other side of the tape
automatically starts playing.
(Auto Reverse)
).
11
10
12
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The source
changes to the previously selected one.
• You cannot change the source if the cassette is
still in the cassette compartment.
To change source, you must eject the cassette
first.
• You can also eject the cassette by pressing 0
while the unit is turned off.
To fast-wind a tape
Press in ¡ or 1.
The tape will be wound in the direction of the arrows
( ¡ or 1 ).
To restart playback, lightly press the other button
which is not pressed in ( 1 or ¡ ).
Tape direction
Advertisement
Table of Contents
