Storing Your Own Sound Adjustments - JVC KW-XC838 Instruction Manual

Storing your own sound
adjustments
You can adjust the sound modes to your
preference and store your own adjustments in
memory (USER sound mode).
• There is a time limit in doing the following
procedure. If the setting is cancelled before you
finish, start from step 1 again.
1
Select "EQ."
Canceled
2
Select sound elements to adjust.
Each time you press the button,
the sound elements to adjust
change as follows:
LOW FREQ.*
MID FREQ.*
HIGH FREQ.*
(back to the beginning)
FREQ. (LOW, MID, HIGH):
Select the center frequency to
adjust.
LEVEL (LOW, MID, HIGH):
Adjust the enhancement level
* By pressing ¢
directly move as follows:
LOW FREQ.
HIGH FREQ.
EQ
S.BASS
L.V.METER
LOW LEVEL
MID LEVEL
HIGH LEVEL
.
or 4
, you can
MID FREQ.
3
Adjust the selected sound element.
Indication
LOW FREQ. 50 Hz , 80 Hz , 120 Hz
LOW LEVEL –06 (min.) — +06 (max.)
MID FREQ. 700 Hz , 1 kHz , 2 kHz
MID LEVEL –06 (min.) — +06 (max.)
HIGH FREQ. 8 kHz , 12 kHz
HIGH LEVEL –06 (min.) — +06 (max.)
EQ level adjusted flashes.
EX.: When you adjust "LOW FREQ."
4
Repeat steps 2 and 3 to adjust the
other sound elements.
5
Store the adjustments.
Your setting is stored in USER
sound mode.
• Refer to the table
below for adjusting the
selected sound
element.
Range
27