Panic Keys - Honeywell LYNX Touch L7000 Series User Manual

SECURING THE PREMISES

Panic Keys

Panic Keys
Your system may have been programmed to use special icons to manually activate panic functions. The
functions that might be programmed are listed below. See your installer for the function(s) that may have been
programmed for your system.
Note: Your installer should advise which functions are active in your system.
Panic Icons
Icon
When activated, alerts the alarm monitoring company that a fire condition exists.
Fire
When activated, alerts the alarm monitoring company that a police emergency exists.
Police
When activated, alerts the alarm monitoring company that a health emergency exists.
Medical
Types of Panic Alarms
 A silent emergency/silent alarm sends an alarm signal to the alarm monitoring company, if your system
is connected to an alarm monitoring company, but there will be no audible alarms or visual displays.
 An audible emergency/audible alarm sends an emergency message to the alarm monitoring company, if
your system is connected to an alarm monitoring company, and sounds a loud, steady alarm at your control.
("ALARM" will be announced and the Alarm icon is displayed along with "Alarm" and "Alarm 99 Police"
alternately.
 A personal emergency/aux alarm sends an emergency message to the alarm monitoring company, if
your system is connected to an alarm monitoring company, and sounds at controls, but not at external
sounders. . ("ALARM" will be announced and the Alarm icon is displayed along with "Alarm" and with
"Alarm 96 Medical".
 A fire alarm sends a fire alarm message to the alarm monitoring company, if your system is connected to
an alarm monitoring company, and uniquely activates the sounder. The Fire Alarm icon is displayed along
with "Fire Alarm 95 Fire".
Activating a Panic Alarm
Ready To Arm
Police Fire
Fire Alarm
Fire Alarm
95 Fire
Enter Code:
Cancel
Medical
5200-100-031-V0
1 2 3
4 5 6
7 8 9
Clear 0
5200-100-032-V0
Function
1. With the system in the disarmed or armed state, depress and
hold the "Panic" key until the system displays the Panic
screen (approximately 3-4 seconds).
2. Touch the desired panic icon on the screen.
3. If applicable, the alarm sounds and the associated icon is
displayed.
Note: Dependent upon how your system has been programmed
a keypad may be displayed. This will allow you to cancel
the alarm by entering valid User Code on the keypad.
– 30 –