Chime Mode - Honeywell LYNX Touch L7000 Series User Manual

Chime Mode

Your system can be set to provide you with an audible alert of the opening of a door, while it is disarmed, by
using Chime mode. When activated, three beeps
protected perimeter door is opened and the zone voice descriptor will be announced, if programmed. The Chime
mode can be changed
displayed on the Security Screen. Selecting the "Zones" icon displays the open protection points.
Turning Chime Mode On or Off
Ready To Arm
Arm Away Arm Stay
Delay 10:18 AM June 8, 2010
Ready To Arm
Brightness
Contrast
Volume
Voice Ringer
Selecting Chime Sounds
Ready To Arm
Arm Away Arm Stay
Delay
10:18 AM June 8, 2010
Ready To Arm - Bypass
2. Front 3. Garage
Door Door
READY
96. Medical
95. Fire
READY
99. Police
READY
Chime
Standard
only when the system is disarmed.
Tools
Settings
Back
5200-100-033-V0
Clean
Chime Save
5200-100-034-V0
Zones System
Message
More
7000-100-020-V0
READY
READY
Select
Save
Chime
5200-100-090-V0
or a programmed chime
Additionally, the faulted zone information will be
1. With the system in the disarmed state, select the "Settings"
icon from the second page of the Security Screen. The
system displays the Settings screen.
Note: The Settings Screen display is variable dependent upon
the features that have programmed in your system.
2. Select the "Chime" icon. The system toggles between "Off"
and "On" and when selected the button turns
"On" is selected, the Chime mode will be active.
3. Select the "Save" button to save your new settings.
4. Select the  icon to return to the Security Screen.
1. With the system in the disarmed state, select the "Zones" icon
from Security Screen. The system displays the Zones screen.
2. Select the "Select All" button and scroll through the options
until "Select Chime" button appears.
3. Select the applicable zone from the displayed list and then
select the "Chime" button to scroll through the available
chimes. Each chime sounds when selected.
4. Select the "Save" button to save your new settings.
5. Enter the Master User code on the displayed keypad.
6. The system returns to the Security Screen.
– 31 –
SECURING THE PREMISES
Chime Mode
will sound at the control whenever a
green. When