Clock/Calendar - Honeywell LYNX Touch L7000 Series User Manual

Note: If your system is equipped with a
updated automatically via Central Station. You may still program the correct Time Zone as shown below. Check with your
installer to see if your system is equipped with a Communications Module.
Setting the Date and Time
Ready To Arm
Arm Away Arm Stay
Delay 10:18 AM June 8, 2010
Ready To Arm
Program the system
Enter Code:
Cancel
Ready To Arm
Users Events
Date Time Reminders
Ready To Arm
June
SUN MON TUE WED
1 2
6 7 8 9 10
13 14 15 16 17
20 21 22 23 24
27 28 29 30
4GLT/4GLTC
Tools
Settings
Back
5200-100-033-V0
1 2 3
4 6
5
7 9
8
Clear
0
5200-100-035-V0
Test Keypad
Slide Show WiFi Config
Back
5200-100-036-V0
2010
THU FRI SAT
3 4 5
11 12
18 19
25 26
Save
5200-100-048-V0
or ILP5 Communication Module, the time and date will be programmed and
Note: The system must be disarmed in order to set the date and
time.
1. With the system in the disarmed state, select the "Tools" icon
from the second page of the Security Screen. The system
displays the Keypad screen.
2. Enter your 4-digit Master User Code. The system displays the
Master User programming screen.
3. Select the "Date Time" icon. The Calendar screen will appear.
4. Select the correct month by using the "" and "".
5. Select the correct year by using the "" and "".
6. Select the correct day on the calendar.
7. When you have finished select the "" icon. The system
advances to the time screen.
– 41 –
USER FUNCTIONS

Clock/Calendar