About The Display And Indicators - Honeywell LYNX Touch L7000 Series User Manual

Display Definitions
ICON TEXT
Ready to Arm
Armed Away
Armed Stay
Exit Now
28 Seconds
Alarm
Fault (Zone
No.&
Description)
OR
Fire OR
Fire Alarm
95 Fire
Alarm 96
Medical
Alarm 99
Police
CO Alarm
Cover Tamper A check system icon along with "Cover Tamper" is displayed when a cover tamper has
Reporter
Failure
Displayed along with the the text "Ready To Arm" when system is Disarmed and ready
to arm.
"Armed Away" is displayed along the top of the screen. An armed away icon along with
"Armed Away" is displayed after the exit delay expires.
"Armed Stay" is displayed along the top of the screen. An armed stay icon along with
"Armed Stay" is displayed after the exit delay expires.
"Armed Stay – Exit Now" or "Armed Away – Exit Now" is displayed in a red status bar
along the top of the screen. An exit icon along with "Exit Now" and the time remaining
(i.e.; "28 Seconds") is displayed during the exit delay.
"Alarm" is displayed in a red status bar along the top of the screen. An alarm (bell) icon
along with "Alarm" is displayed alternately with the Zone that has caused the alarm.
"Not Ready To Arm – Fault" is displayed in a yellow status bar along the top of the
screen. An open windowor door icon along with the zone descriptor and "Window" or
"Door" is displayed when a window or entry/exit fault has been detected.
OR
Displayed alternately with the alarm (bell) icon and "Alarm".
"Alarm" is also displayed in a red status bar along the top of the screen.
The fire icon is displayed with alternating text "Fire" and "Fire Alarm 95 Fire". "Fire
Alarm" is also displayed in a red status bar along the top of the screen.
The Medical icon displayed when a medical alarm is activated. "Alarm" is also displayed
in a red status bar along the top of the screen. (If programmed for display by your
installer)
The alarm (bell) icon when a burglary alarm is activated. "Alarm" is also displayed in a
red status bar along the top of the screen. (If programmed for display by your installer)
No display if 24 Hour Silent Response Type has been programmed.
Displayed alternately with Carbon Monoxide when a CO alarm is activated.
"CO Alarm" is also displayed in a red status bar along the top of the screen.
been detected. "Ready To Arm – System Trouble" is displayed in a yellow status bar
along the top of the screen.
The system has identified a problem with the telephone dialer.
– 11 –
SYSTEM OVERVIEW

About the Display and Indicators

DEFINITION