Table of Contents
Advertisement
SYSTEM OVERVIEW
SYSTEM OVERVIEW
SYSTEM OVERVIEW
SYSTEM OVERVIEW
About the Display and Indicators
Display Definitions
ALARM:
Appears when the system is armed and an intrusion has been detected (also appears
during a fire alarm or audible emergency alarm). Accompanied by the protection zone
that is in alarm.
AWAY:
All burglary zones, interior and perimeter, are armed.
INSTANT:
Entry delay is turned off.
STAY:
Perimeter burglary zones, such as protected windows and doors, are armed.
U U U U L L L L
LYNXR-ENSIA is not intended for UL985 Household Fire applications unless a 24-hour backup battery
(P/N LYNXRCHKIT-HC) is installed.
FIRE:
Appears when a fire alarm or fire fault is present. Accompanied by a display of the
zone that is in alarm.
LOW BAT:
Low battery condition in a wireless sensor (if zone number is displayed) or low system
battery (if no zone number is displayed). If 00 is displayed, a wireless keypad (5827)
has a low battery condition.
AC:
Appears when AC power is present. If not displayed, the system is operating on
backup battery power.
CHIME:
Appears when the Chime feature is activated.
TEST:
Appears when the system is in Test mode. Blinks during the last 5 minutes of test.
REC:
Appears when the system is in Recording mode.
MESSAGE:
Appears when a message has been recorded and has not yet been played back.
BYPASS:
Appears when one or more burglary protection zones have been bypassed.
FAULT:
Appears at any time a malfunction is discovered in the system; or any time an open
is detected in a fire zone; or when a fault in a day/night burglary zone is discovered
during a disarmed period. Accompanied by a display of the zone number in trouble.
PH:
Appears in place of the clock when the speaker phone mode is active.
PC:
Appears during a remote phone control session.
LED Meanings
ARMED LED:
ON = System armed
(Red)
OFF = System disarmed
Blinking = System armed, but a fault exists
Blinking alternately with READY LED = AVM (VOX or Talk) or speaker phone mode
is active
READY LED:
ON = System disarmed, ready to arm
(Green)
OFF = System armed
Blinking = System disarmed, not ready to arm (a fault exists)
Blinking alternately with ARMED LED = AVM (VOX or Talk) or speaker phone
mode is active.
(for other displays, see Trouble Messages)
– 14 –
AWAY
LOW BAT AC
CHIME TEST
INSTANT
STAY
REC MESSAGE
ALARM
FAULT
FIRE
BYPASS
Advertisement
Table of Contents
