Honeywell Xenon 1900 User Manual page 37

When mounted on a vertical surface, a locking system is used to secure the scanner when it is in the stand. When mounted on
a horizontal surface, the locking mechanism should be set to unlocked (pushed up). When mounted on a vertical surface, the
locking mechanism should be set to locked (pushed down).
Use 30mm screws, appropriate for the mounting surface material, to mount the base securely.
Locked position
for vertical mount
2.51 in. 5.31 in.
63.7mm 134.92mm
Unlocked position
for horizontal mount
2 in.
51.17mm
2.36 in.
60mm
.84 in.
21.42mm
1 - 9