Msi; Msi Check Character - Honeywell Xenon 1900 User Manual

MSI

MSI On/Off
On

MSI Check Character

Different types of check characters are used with MSI bar codes. You can program the scanner to read MSI bar codes with
Type 10 check characters. Default = Validate Type 10, but Don't Transmit.
When Check Character is set to Validate Type 10/11 and Transmit, the scanner will only read MSI bar codes printed with
the specified type check character(s), and will transmit the character(s) at the end of the scanned data.
When Check Character is set to Validate Type 10/11, but Don't Transmit, the unit will only read MSI bar codes printed
with the specified type check character(s), but will not transmit the check character(s) with the scanned data.
* Validate Type 10, but Don't
Transmit
Validate 2 Type 10 Characters,
but Don't Transmit
Validate Type 10 then Type 11
Character, but Don't Transmit
<Default All MSI Settings>
* Off
Validate Type 10 and Transmit
Validate 2 Type 10 Characters
and Transmit
7 - 29