Omron V750-BA50D04-SG-MY User Manual page 88

(2) Stop the repeating operation (STOP)
This command instructs the reader to stop the operation in process.
Command
Response
* The communication process is not running in the reader, the error is returned [Code: 1500].
Example 1) When the reader stops multi-repeat communication:
[Tx] RDID -seq MRP -ant 12
[Tx] STOP<LF>
[Rx] STOP0000<LF>
STOP<LF>
Note: No arguments
STOP[RC]<LF>
[RC]: Response Code
---- Read ID command is started under multi-repeat mode.
88 of 135