*1) About the Error code:
If the error is indicated as XXX(YY), Setting Error has occurred. XXX means error cause and YY means
error type (see below error code list).
If the error is indicated as ZZ, it means System Error has occurred. ZZ means error code.
On Setting Error, reason of the error is displayed with both error code and the description.
On System Error, only error code is displayed.
Setting Error code and Description list
Description (XXX)
DHCP Server
Comm. Settings
Comm. Settings
Operation Settings
Reader Settings
Action
[Reset System]
To reboot the system
the browser by clicking Reload button or opening another browser.
Errors
1) Can No Connect
It means that the host computer can not receive the data from the reader. In this case, you have to
check the Ethernet connection, restart the browser and then access the reader again.
Status code (YY)
31
33
35
36
37
, push the [Reset System] button. After rebooting the reader, you can access
104 of 135
Error type
DHCP Server error
Communication setting error
Communication setting error
Operation setting error
Reader setting error