Omron V750-BA50D04-SG-MY User Manual page 112

Description of Each Item
Command Entry
Item
Response Interface
Initial Exec
(*1)
Input 1 (*1)
Input 2 (*1)
Input 3 (*1)
Input 4 (*1)
Programmable Output
Item
Output 1 (*1)
Function
Duration [ms]
(*2)
Condition
(*2)
Output 2
Output 3
Output 4
*1)
To input commands and select items in the fields of the Initial Exec., Input 1-4 and Output 1-4, check
ON the checkbox attached forward to each item.
*2)
Condition is active only when Function setting is selected as NML or ERC.
Description
Interface selection to send
response of the
command
Initial command executed
automatically on booting
Command executed when
input port 1 is activated
Command executed when
input port 2 is activated
Command executed when
input port 3 is activated
Command executed when
input port 4 is activated
Description
Programmable output 1 settings
Output function
synchronize with this port
Duration for output
Condition for output
(Available only when
function is NML or ERC)
Programmable output 2 settings
(Setting items are the same as Output 1)
Programmable output 3 settings
(Setting items are the same as Output 1)
Programmable output 4 settings
(Setting items are the same as Output 1)
112 of 135
The range of the set
code.
Ethernet / RS-232C /
None
Command characters
Command characters
Command characters
Command characters
Command characters
The range of the set
code.
RUN / ERR / COM /
ANT1 / ANT2 / ANT3 /
ANT 4 / NML / ERC
0 or more and less than
9990
Default
Ethernet
(None)
(None)
(None)
(None)
(None)
Default
(None)
(None)
(None)