Table of Contents
Advertisement
Action
[Apply]
To change and try the setting of the communication soon,
push the [Apply] button. The setting works effectively in the coming communication (but not saved). If all
the applying process is finished successfully, the reader displays "Successfully Saved" in the page.
Applying process is executed in the displayed order, from RF Control, Filtering to Smoothing.
If saving process is succeeded, the label changes its color from black to blue. If failed, it changes to red.
[Save]
To save the changes of the communication settings,
[Apply] button, make sure applying process has complete successfully and then push the [Save] button.
All the displayed values are set in the reader's nonvolatile memory. It becomes effective as a default
value after booting next time.
Errors
1) Invalid Parameter(s) in [ XXX ]
It indicates that the data set in XXX is incorrect. (XXX will be one of RF Control, Filtering or Smoothing)
In this case, correct the data and click "Save" button again.
2) Can Not Connect
It means that the host computer can not receive the data from the reader. In this case, you have to
check the Ethernet connection, restart the browser and then access the reader again.
3) This Function is NOT Available Now
It means that saving process can not be executed because of reader status.
If you open this page while communicating with tag, the V750 reader displays the error message "This
Function is NOT Available Now." and set [Apply] button disable. On that time, you have to stop reader's
communicating process and open this page again.
Then [Apply] button is enabled and you can change the settings.
4) Unregistered Filter Condition
It means a filter selection is selected although filter condition is not set. Confirm the parameters of filter
conditions.
enter the values to change, push the
110 of 135
enter the values to change and
Advertisement
Table of Contents
