Description of Each Item
Item
Product Type
Firmware Version
Serial Number
MAC Address
Valid Antenna(s)
Operation Status
TCP/IP Connection
Latest Communication
(Latest Comm.)
Source
Command
Result
Operation time
Description
Type name of the product
V750-BA50D04-SG(-MY)
Firmware version currently installed in the
reader.
XXX-XXX-XXX-X
Unique number for product set in the
factory.
The reader's MAC address.
Antenna(s) the reader has detected at
start-up.
- In blue: valid
- In light gray: invalid
Indicates the reader's status with the
following code.
- Ready: waiting for command
- Communicating : command being
executed
- Setting Error - XXX(YY):Setting Error
occurred
- System Error (ZZ) : system error
occurred
Indicates TCP/IP port connection status:
No Connection / Connected
Indicates "Active" in orange if a command
is being executed.
Interface name of command execution
source.
Ethernet / RS-232C / IN1 / IN2 / IN3 / IN4 /
Web
The command code that is being
executed.
Ex.) RDID -ANT 1 -TMO 1000
Executed result (Command, response
code, and the number of tags)
Ex.) RDID0000 001
Time past after start up.
Ex.) 01:23:45.
103 of 135
Note
Fixed data
Stable data if not
updated firmware
Fixed data
Fixed data
Stable data that does
not change after start-up
See below the Error
code list for detail. (*1)
It indicates the current
command status by
using command I/F
(Ethernet/RS-232C) or
the other registered
command.
It indicates the executed
command.
After communication
completed, the response
are shown. It remains
blank if the command is
being executed or has
not been executed yet.
Time starts with
"00:00:00"at the start-
up.
If the time exceeds
9999:59:59, the
indication returns
"00:00:00".