Installation And Usage Guide; Before You Begin; Installation Requirements; Performance Considerations - Omron V750-BA50D04-SG-MY User Manual

V750-series uhf rfid system reader/writer antenna
Table of Contents

Advertisement

1. Installation and Usage Guide

About this Guide
This installation and usage guide explains how to install the V750 reader, how to use the browser-based
interface, and how to control the reader remotely.

1.1 Before You Begin

1.1.1 Installation Requirements

The reader is shipped with DC cable whose length is 2.9m (9.6ft).
Use only authorized antennas and cables to conform to the local laws and regulations.
Provide strain relief for all reader connections.
The minimum screw size for mounting the reader is M4. Use suitable wall anchors when mounting to
drywall or masonry whose thickness is 16mm or more.(Refer to 1.4.1 Install the reader)
A Shielded Ethernet cable must be used to communicate with other devices.
Multiple readers and antennas can be used in combination to enhance detectability at specific locations
provided the software application is able to synchronize antenna operation.

1.1.2 Performance Considerations

Reader performance may be affected by external factors including tag variables and environment.
Performance tests conducted under typical operating conditions at your site are recommended to help you to
optimize system performance.
Tag Variables
There are several variables associated with tags that can affect reader performance:
Application surface — Some materials interfere with tag performance including metal and moisture. Tags
applied to items made from or containing these materials may not perform as expected.
Tag orientation — Reader performance is affected by the orientation of the tag in the antenna field.
Tag model — many tag models are available. Each model has its own performance characteristics (refer to
Chapter 2.5).
Environment
Reader performance may be affected by the following:
Metal surfaces such as desks, filing cabinets, bookshelves, and waste cans may enhance or degrade
reader performance.
Mount antennas as far as possible from metal surfaces that are adversely affecting system performance.
Devices that operate at 900 MHz, such as cordless phones and wireless LANs, can interfere with reader
performance. These devices may degrade performance of the reader. The reader may also adversely
affect performance of 900 MHz devices.
Antennas operating in close proximity may interfere with one another, thus degrading reader performance.
14 of 135
©

Advertisement

Table of Contents
loading

This manual is also suitable for:

V740-hs01caV740-hs01laV750-ba50d04-sgV750 series

Table of Contents