Table of Contents
Advertisement
1. Hold the antenna in its mounting location and mark the position of the mounting screws with minimum (4)
points. The antenna has several mounting holes for each side. Choose 4 of those with diagonal position
according to the mounting location.
2. Drill holes for the screws and install wall anchors if required.
3. Insert the M4x20 screws with spring washers and flat washers and tighten until almost flush with the wall.
4. Tighten the screws securely.
Note: For best performance, mount the antenna in the horizontal orientation as pictured above.
Mounting holes
21 of 135
Advertisement
Table of Contents
